Skip to content
3D Printing Tolerances & Fits - 3DChimera

Jan 14, 2019

3D Printing Tolerances & Fits

If you are reading this, then there is a greater than 90% chance you are an engineer or designer interested in 3D printing functional parts. 


Like any manufacturing process, in 3D printing it is important to understand the tolerances of the process so that you can properly design parts to fit together and function.

While each printer and technology has specific tolerances that can be achieved, we find that the following designed-in clearances will allow your parts to fit together and function as intended:

Desired Fit Clearance Gap (in) Clearance Gap (mm)
Press Fit Line to Line Line to Line
Tight Fit 0.005 0.127
Normal Fit 0.010 0.254
Loose Fit 0.020 0.508

 

And don't forget...holes in 3D printed parts are ALWAYS undersized.  This is because of the STL file format that is used for 3D printing...we are building a circle from the straight edges of triangles...think circumscribed circle. 

 

Good news is that holes can easily be reamed out by a handy-dandy drill bit

Alexander Hussain

Want to learn how advanced manufacturing can support your business?

Connect with our experts

Check Out Our...

  • On Sale

X1E 3D Printer

Bambu Lab X1E

  • Sold Out

Axtra3D Lumia X1

  • Sold Out

Bambu Lab H2D AMS Combo

  • Sold Out

innovatiQ TiQ 2

Bambu Lab X1C Combo

  • Sold Out

innovatiQ TiQ 5

  • Sold Out

innovatiQ MiQ 5

  • Sold Out

L320 LAM - 3DChimera

innovatiQ LiQ 320

More You Might Like

PODCAST: How 3DChimera Uses 3D Printing and 3D Scanning to Solve Manufacturing Challenges

PODCAST: How 3DChimera Uses 3D Printing and 3D Scanning to Solve Manufacturing Challenges
Alex Hussain, CEO of 3DChimera, joined the LIFT podcast to share how his team is making 3D printing and 3D scanning work in real-world manufacturing. The discussion covers practical ways to use additive manufacturing in demanding environments, from small batch production to on-the-spot problem solving.

Read more
Connecting Multiple AMS Units to the H2D? No Hub Required.

Connecting Multiple AMS Units to the H2D? No Hub Required.
One of the most common questions we get about the Bambu Lab H2D is: “Do I need an AMS Hub or buffer to run multiple AMS units?” The answer is simple: No.

Read more
The Real Price of a Small Breakdown

The Real Price of a Small Breakdown
Sometimes it is not the big failures that cost the most. A $5 part goes out, you shift resources, and think you have it covered. Days later, you realize the “workaround” created a bottleneck. Now your most profitable line is running slow, and every day down costs $20,000 in lost profit.

Read more