TPE Flexible Powder, Sintratec
Sintratec TPE was developed to produce flexible, rubber-like parts. With an impressive elongation at break and excellent elastic restorative capacity and rebound elasticity, it shows the ideal characteristics for applications requiring elastic parts.
|Melt Point||110C, 230F|
|Bending Stress (Max)||5.28 MPa|
|Tensile Stress (Max)||2 MPa|
|Tensile Modulus (Max)||29.9 MPa|
|Tension Strain (Max)||250%|
|Particle Size||0.06mm (60 micron)|
|Durometer||~40-50 Shore A|
|Volume (2L)||2L, 2000cm^3, 122in^3|
|Cost / Volume||$0.07 / cm^3, $1.22 / in^3|
|Approx Weight (2L)||1.05kg, 2.31lb|
|Reuse Ratio||50% new / 50% used|
Safety Data Sheet (MSDS)
Changing from printing Sintratec PA12 to Sintratec TPE material in a Sintratec Kit is possible, but it requires special attention to cleanup process. It is not possible to swap materials in a Sintratec S2 MCU.