Sintratec TPE Flexible Powder (Grey), 1kg
Regular price
$159.00
Only 2 in stock
Sintratec TPE was developed to produce flexible, rubber-like parts. With an impressive elongation at break and excellent elastic restorative capacity and rebound elasticity, it shows the ideal characteristics for applications requiring elastic parts.
Specs
| Color | Grey |
| Melt Point | 110C, 230F |
| Bending Stress (Max) | 5.28 MPa |
| Tensile Stress (Max) | 2 MPa |
| Tensile Modulus (Max) | 29.9 MPa |
| Tension Strain (Max) | 250% |
| Particle Size | 0.06mm (60 micron) |
| Durometer | ~40-50 Shore A |
| Volume (2L) | 2L, 2000cm^3, 122in^3 |
| Cost / Volume | $0.07 / cm^3, $1.22 / in^3 |
| Approx Weight (2L) | 1.05kg, 2.31lb |
| Reuse Ratio | 50% new / 50% used |
Data Sheet
Tensile Test & Mechanical Properties Fact Sheet
Safety Data Sheet (MSDS)
Important Note
Changing from printing Sintratec PA12 to Sintratec TPE material in a Sintratec Kit is possible, but it requires special attention to cleanup process. It is not possible to swap materials in a Sintratec S2 MCU.