Skip to content

Country

MakerBot METHOD

Makerbot

Regular price $4,499.00 Sale price $4,999.00

Unit price per 

only 0 left in stock

An intuitive prototyping 3D Printer at an affordable price.

Features

Dual Performance Extruders

The Dual Performance Extruder system is built from the ground up to accelerate print times and provide dimensional accuracy across every part.

Dry-Sealed Material Bays

Dry-Sealed Material Bays form a near-perfect seal to keep material free of damaging humidity. A suite of built-in sensors provides that your material is stored in its optimal environment—a feature previously only available in industrial 3D printers.

Engineering Grade Materials

With its dual extruders and heated chamber, the METHOD is capable of printing a wide variety of materials right out of the box, including:

  • PETG - All-around prototyping material w/ good chemical resistance
  • Nylon - Tough material with good strength and lubricity
  • PLA - The go to bio-material for sustainable prototying
  • Tough - A tougher bio-material, ready for challenging parts 
  • PVA - Dissolvable support for all materials beside ABS & ASA

Guaranteed Part Accuracy & SR-30 Soluble Support

  • Complex geometries that are impossible to print with advanced materials on a desktop 3D printer – Enabled by Stratasys SR-30 soluble supports
  • The only printer in its class to guarantee finished part dimensional accuracy ± 0.2 mm (± 0.007 in).
  • Print complex assemblies that fit with tight tolerances – every time.

Unrestricted Geometric Freedom - Dissolvable Support System

Superior surface finish and unrestricted geometric freedom are paramount to delivering high quality printed parts. MakerBot Water-Soluble PVA ensures fast and effortless support removal without compromising part design or dimensional accuracy.

MakerBot Water-Soluble PVA provides two key benefits:

  • Unrestricted geometric freedom (large overhangs, cavities, etc.)
  • Superior print quality and surface finish

    Heated Chamber Delivers Stronger Manufacturing-Grade Parts

    • A Heated Chamber produces stronger parts than a heated build plate
    • Achieve consistent st
    • Print real ABS, ASA, and PC-ABS with superior mechanical and thermal properties than modified desktop 3D printer formulations.

    Guaranteed Part Accuracy & SR-30 Soluble Support

    • Complex geometries that are impossible to print with advanced materials on a desktop 3D printer – Enabled by Stratasys SR-30 soluble supports
    • The only printer in its class to guarantee finished part dimensional accuracy ± 0.2mm (± 0.007in).
    • Print complex assemblies that fit with tight tolerances – every time.

    Save Engineering Time With An Automated Workflow & CAD Integration

    • Put an end to tinkering and time-consuming printer upkeep with the most streamlined workflow in the industry, including automated material handling, build plate leveling, and extruder calibration.
    • Keep your projects moving and enjoy enjoy peace of mind with our leading in-house customer support and MakerCare machine hot swap.
    Sit Back and Relax

    With the METHOD there is no need to worry about concerns of other desktop 3D printers:

    • Bed Leveling - Automated!
    • Support Material - Dissolve your concerns away!!
    • Filament Run Out - We got a Sensor for that!!
    • Filament Jam - We got a Sensor for that too!!
    • Environmental Temperature - Heated Chamber controls for that!
    • Material Mix-up - ID tags and sensors!!
    • Print Parameters - MakerBot Print has pre-configured printer parameters for all MakerBot materials
    • Humidity in the Filament - Our materials keep dry material dry, and we have a sensor to check that at all time...if it is wet, you can dry the filament in the build chamber!
    Specs
    Dimensional Accuracy +/- 0.2 mm
    +/- 0.007 in
    Layer Resolution 20 - 400 microns, Balanced = 200 microns
    Chamber Temp 60°C, circulating heat
    Material Loading Automated
    Z Calibration Automated
    Nozzle Calibration Automated
    Nozzle Size 0.4 mm
    Max Material Flow Rate ~50 mm3/sec
    Build Volume 19 x 19 x 19.6 cm (7.5 x 7.5 x 7.75 in) in single extrusion
    15.2 x 19 x 19.6 cm (6.0 x 7.5 x 7.75 in) in dual extrusion
    Printer Weight 29.5 kg / 65 lbs
    Printer Size  437 x 713 x 649 mm
    17.2 x 16.3 x 25.6 in
    Display  5" full-color capacitive touch
    Camera Resolution 640 x 480 pixels
    Electrical 100-240V, 3.9A -1.6A, 50/60Hz, 400W max
    Connectivity USB, Ethernet, WiFi
    Warranty  1 yr included, extendable to 3 yrs with support plans
    Software  MakerBot Print + MakerBot Mobile (no additional fees)


    Why 3DChimera?
    • Consultative approach - you have questions, we have answers based on real world experience.
    • 1 Yr Warranty included.
    • MakerBot Certified Distributor for the USA.
    • Educational Discount for all requests from .edu email address.
    • Volume Discounts when purchasing in bulk.
    • Training, Support and Maintenance Packages available for a worry-free experience with your new 3D Printer.
    • More than just sales - we are experts, using this technology everyday for customers around the USA.
    • Bring us your challenging application, we love to help!
    • Our service is unmatched in the industry - call us 24/7 at 786.701.0700 to find out why.
      Close (esc)

      Join our mailing list

      Stay up to date with the latest products, developments and thought leadership in advanced manufacturing.

      Age verification

      By clicking enter you are verifying that you are old enough to consume alcohol.

      Search

      Shopping Cart

      Your cart is currently empty.
      Shop now